☎ (+66) 2-993-8766✉ sales@dkkthai.comMon–Fri
THEN
Home / Products / ETAC Environmental Test Chambers

ETAC Environmental Test Chambers

Environmental test chambers and reliability evaluation systems from Japan — DKK has been the exclusive distributor in Thailand since 2002.

Temp & HumidCompactThermal ShockIndustrial OvenWalk-inSIR13MLR23Other models
ETAC · Environmental Test Chambers

Temperature & humidity chambers

HIFLEX NEO-E
Product photo (pending)
Standard Temperature & Humidity Chamber

HIFLEX NEO-E

ETAC's flagship low-temperature & humidity chamber for R&D and quality assurance — designed to be safe, comfortable and hassle-free.

  • Runs 85°C/85%RH continuously for up to 1,000 hours on a single water supply, thanks to a water vapor recovery system
  • UV sterilization of humidifying water prevents water-circuit problems
  • DC inverter rotary refrigerator automatically optimizes cooling capacity
  • Dew-condensation prevention and 23°C standby after testing
  • Operate and monitor from a PC or tablet (Smart Connect option)

Line-up at a glance

ModelTemp. rangeInternal W×H×D (mm)Capacity
FX413N-E / FL413N-E-40 ~ +100°C600 × 750 × 600270 L
FX423N-E / FL423N-E-40 ~ +100°C700 × 950 × 700465 L
FX433N-E / FL433N-E-40 ~ +100°C1000 × 1000 × 800800 L
FX713N-E / FL713N-E-70 ~ +100°C600 × 750 × 600270 L
FX723N-E / FL723N-E-70 ~ +100°C700 × 950 × 700465 L
FX733N-E / FL733N-E-70 ~ +100°C1000 × 1000 × 800800 L

FX = temperature + humidity (20–98%RH) · FL = temperature only · Fluctuation ±0.3°C / ±2.5%RH · Option: +150°C specification · R-448A refrigerant

Ask about this model Spec SheetManufacturer page ↗
Spec Sheet full specification table12 models
SpecificationFX413N-EFX423N-EFX433N-EFX713N-EFX723N-EFX733N-E
Performance
Temp. range-40℃ ~ +100℃【-40℃ ~ +150℃】-40℃ ~ +100℃【-40℃ ~ +150℃】-40℃ ~ +100℃【-40℃ ~ +150℃】-70℃ ~ +100℃【-70℃ ~ +150℃】-70℃ ~ +100℃【-70℃ ~ +150℃】-70℃ ~ +100℃【-70℃ ~ +150℃】
Humidity rangeSee catalogue non-frost / humidity control range table.20% RH ~ 98% RH
Heat up timeFX4: -40℃ to +100℃【+150℃】; FX7: -70℃ to +100℃【+150℃】Within 45 min【Within 60 min】Within 50 min【Within 75 min】Within 45 min【Within 65 min】Within 55 min【Within 75 min】Within 70 min【Within 90 min】Within 50 min【Within 75 min】
Pull down timeFX4: +20℃ to -40℃; FX7: +20℃ to -70℃Within 40 minWithin 45 minWithin 40 minWithin 90 minWithin 90 minWithin 100 min
Heat up rate3.5℃/min【3.5℃/min】3.0℃/min【2.5℃/min】4.0℃/min【3.5℃/min】3.0℃/min【3.0℃/min】2.5℃/min【2.5℃/min】3.5℃/min【3.0℃/min】
Pull down rate3.5℃/min【3.5℃/min】3.0℃/min【3.0℃/min】3.5℃/min【3.5℃/min】2.0℃/min【2.0℃/min】1.7℃/min【1.7℃/min】1.3℃/min【1.3℃/min】
Temp. & humidity fluctuations±0.3℃ / ±2.5%RH【±0.5℃ (100.1℃~150℃)】
Temp. & humidity gradientTemp.: 3.0℃【5.0℃】; Temp./humidity: 1.5℃ / 5.0%RH
Temp. & humidity variation in spaceTemp.: 2.5℃【3.0℃】; Temp./humidity: 1.5℃ / 5.0%RH
Ambient temp. range for operationIf installation temp. exceeds approx. +35℃, minimum temp. may not be maintained.+5℃ ~ +40℃
Main Unit
Inside dimensions (W × H × D mm)600 × 750 × 600700 × 950 × 7001000 × 1000 × 800600 × 750 × 600700 × 950 × 7001000 × 1000 × 800
Capacity (L)270465800270465800
Outside dimensions (W × H × D mm)880 × 1653 × 1195980 × 1853 × 12951280 × 1914 × 1395880 × 1664 × 1195980 × 1864 × 12951280 × 1914 × 1395
Weight (kg)315378543405468633
Construction
Exterior materialSteel plate with baked paint finish
Test area materialStainless steel plate (SUS304)
Air circulatorSirocco fan
SystemDC inverter-controlled air-cooled rotary refrigeration unitDC inverter-controlled air-cooled rotary refrigeration unitDC inverter-controlled air-cooled rotary refrigeration unit (×2)DC inverter + fixed-speed rotary refrigeration unit (dual system)DC inverter + fixed-speed rotary refrigeration unit (dual system)DC inverter + fixed-speed rotary refrigeration unit (dual system)
RefrigerantR-448AR-448AR-448AR-448A + HFC-23R-448A + HFC-23R-448A + HFC-23
HeaterSheathed heater (SUS316L)
HumidifierFX type only.Nichrome strip heater
Cooler / dehumidifierPlate fin coil
Controller
Control sensorJIS C 1604 3-wire resistance temp. detector Pt100
Control methodPID control
Display / resolutionLED indication; 0.1℃ / 1%RH
Setting method (standard)Main unit setting device / Smart Controller optional web browser system program operation
Interface
Memory / Ethernet / USB8GB; RJ45 10BASE-T/100BASE-TX ×1; USB2.0 Type A ×2
Required Equipment
Power supplyAC200V 3φ 50/60Hz; voltage fluctuation ±10%
Humidifying waterIon-exchanged or distilled water (0.1 ~ 10 μS/cm)
Maximum load current (A)252541333543
Operating current (A)202028202028
Exhaust heat (kW)0.5 ~ 4.80.5 ~ 4.80.5 ~ 7.10.5 ~ 5.00.5 ~ 5.00.5 ~ 5.0
Safety / Features
Protective deviceLeakage breaker; motor overload relay; dry-burn protection; pressure/overload/overheat protection; phase detector; heater/control fuses; sensor disconnect; temp/humidity alarms; inverter, outage, filter, wick, and tank alarms
Additional featuresMemory backup; temporary stop; monitor; self-diagnosis; power failure recovery; momentary power hold; external alarm; test end/time signal; wait; interlock; auto start/timer; auto light shutoff; manual refrigeration; fault history; continuous status recording; room temp standby
Standard Equipment
Main unitEthernet RJ45; φ50mm left cable port; viewing window; interior lighting; casters/adjusters; condenser dust filterEthernet RJ45; φ50mm left cable port; viewing window; interior lighting; casters/adjusters; condenser dust filterEthernet RJ45; φ50mm left cable port; viewing window; interior lighting; casters/adjusters; condenser dust filter (#33 window W420 × H303mm)Ethernet RJ45; φ50mm left cable port; viewing window; interior lighting; casters/adjusters; condenser dust filterEthernet RJ45; φ50mm left cable port; viewing window; interior lighting; casters/adjusters; condenser dust filterEthernet RJ45; φ50mm left cable port; viewing window; interior lighting; casters/adjusters; condenser dust filter (#33 window W420 × H303mm)
AccessoriesInstruction manual; φ50mm silicone plug; water tank; wick gauze (12 pcs)

【 】 = values with the optional high-temperature (+150°C) specification · Performance measured at +23°C ambient, rated voltage, no specimen (per catalogue) · Specifications are subject to change by the manufacturer without notice

Request a quote for this model
HIFLEX SC
Product photo (pending)
Standard Temperature & Humidity Chamber — cost-effective

HIFLEX SC

A cost-effective chamber with a simple core design that keeps stable temperature & humidity control — same test-area sizes as NEO-E.

  • Optional water tank supports 10 days to a month of continuous humidity testing
  • Condensation prevention: humidification delay and room-temperature standby
  • High-durability cooling coil resists organic-acid corrosion (SUS coil optional)
  • Program up to 9 patterns × 26 steps from the main-unit controller

Line-up at a glance

ModelTemp. rangeInternal W×H×D (mm)Capacity
FX310 / FL310-30 ~ +100°C600 × 750 × 600270 L
FX320 / FL320-30 ~ +100°C700 × 950 × 700465 L
FX330 / FL330-30 ~ +100°C1000 × 1000 × 800800 L

FX = temperature + humidity (20–98%RH) · FL = temperature only · Options: +150°C specification, Smart Connect

Ask about this model Spec SheetManufacturer page ↗
Spec Sheet full specification table6 models
SpecificationFX310FX320FX330
Performance
Temp. range-30℃ ~ +100℃【-40℃ ~ +150℃】
Humidity rangeSee catalogue page 2.20% RH ~ 98% RH
Heat up time-30℃ to +100℃【-30℃ to +150℃】Within 45 min【Within 60 min】Within 50 min【Within 75 min】Within 45 min【Within 65 min】
Pull down time+20℃ to -20℃Within 40 minWithin 35 minWithin 45 min
Heat up rate-17℃ to +87℃【-12℃ to +132℃】3.5℃/min【3.5℃/min】3.0℃/min【2.5℃/min】4.0℃/min【3.5℃/min】
Pull down rate+87℃ to -17℃【+132℃ to -12℃】2.5℃/min【2.5℃/min】3.0℃/min【3.0℃/min】1.0℃/min【1.0℃/min】
Temp. & humidity fluctuations±0.3℃ / ±2.5%RH【±0.5℃ (100.1℃~150℃)】
Temp. & humidity gradientTemp.: 3.0℃【5.0℃】; Temp./humidity: 1.5℃ / 5.0%RH
Temp. & humidity variation in spaceTemp.: 2.5℃【3.0℃】; Temp./humidity: 1.5℃ / 5.0%RH
Ambient temp. rangeMinimum temp. may not be maintained above approx. +35℃.+5℃ ~ +40℃
Main Unit
Inside dimensions (W × H × D mm)600 × 750 × 600700 × 950 × 7001000 × 1000 × 800
Capacity (L)270465800
Outside dimensions (W × H × D mm)880 × 1653 × 1195980 × 1853 × 12951280 × 1914 × 1395
Weight (kg)305380495
Construction
Exterior materialSteel plate with baked paint finish
Test area materialStainless steel plate (SUS304)
Air circulatorSirocco fan
SystemAir-cooled rotary refrigeration unit
RefrigerantR-448A
HeaterNichrome strip heater
HumidifierSheathed heater (SUS316L)
Cooler / dehumidifierPlate fin coil
Controller
Control sensorJIS C 1604 3-wire resistance temp. detector Pt100
Control / display / resolutionPID control; LED indication; 0.1℃ / 1%RH
Setting method standardMain unit setting device; constant/program operation up to 9 programs × 26 steps; upper/lower temp/humidity alarms; operation status monitoring
Setting method optionalSmart Connect / Smart Controller; up to 99 programs × 50 steps; repeat up to 999 times
Required Equipment
Power supplyAC200V 3φ 50/60Hz; voltage fluctuation ±10%
Humidifying waterIon-exchanged or distilled water (0.1 ~ 10 μS/cm)
Maximum load current (A)242932
Operating current (A)202022
Exhaust heat (kW)3.3 ~ 3.83.4 ~ 4.93.3 ~ 3.8
Safety / Features
Protective deviceLeakage breaker; fan motor overload; dry-burn protection; refrigeration pressure/overload/overheat; phase detector; heater/control fuses; sensor disconnect; temp/humidity alarms; outage/filter/wick/tank alarms
Additional featuresMemory backup; humidification delay; room temperature standby; test end output; wait; time signal; hold; temporary stop; status display; power failure protection; self-diagnosis; auto start/timer
Standard Equipment
Main unitRound cable port φ50mm left side; casters/adjusters; condenser dust filter
AccessoriesPerformance stated at ambient +23°C, rated voltage, no specimen unless noted.Instruction manual; φ50mm silicone plug; water tank (#13/#23: 10L ×1, #33: 10L ×2); wick gauze (12 pcs)

【 】 = values with the optional high-temperature (+150°C) specification · Performance measured at +23°C ambient, rated voltage, no specimen (per catalogue) · Specifications are subject to change by the manufacturer without notice

Request a quote for this model
HIFLEX NEO-ES
Product photo (pending)
Compact Temperature & Humidity Chamber

HIFLEX NEO-ES

Small stackable chambers that need up to 80% less installation space than conventional models, sharing components with the high-end NEO-E.

  • Stack 1–3 layers, each running its own test condition
  • Reaches -40°C even at +35°C ambient
  • High-volume sirocco fan keeps distribution uniform with specimens loaded
  • Rectangular cable ports on both sides; one-touch 10 L water tank

Line-up at a glance

ModelTemp. rangeInternal W×H×D (mm)Capacity
SXN401-E / SLN401-E-40 ~ +100°C500 × 350 × 35061 L
SXN402-E / SLN402-E-40 ~ +100°C(500 × 350 × 350) × 261 L × 2
SXN403-E / SLN403-E-40 ~ +100°C(500 × 350 × 350) × 361 L × 3
SXN412-E / SLN412-E-40 ~ +100°C(600 × 600 × 500) × 2180 L × 2

SXN = temperature + humidity (20–98%RH) · SLN = temperature only · Option: +150°C specification

Ask about this model Spec SheetManufacturer page ↗
Spec Sheet full specification table8 models
SpecificationSXN401-ESXN402-ESXN403-ESXN412-E
Performance
Temp. range-40℃ ~ +100℃【-40℃ ~ +150℃】
Humidity rangeSee catalogue page 3 non-frost range.20% RH ~ 98% RH
Heat up time-40℃ to +100℃【-40℃ to +150℃】Within 35 min【Within 45 min】Within 35 min【Within 45 min】Within 35 min【Within 45 min】Within 35 min【Within 50 min】
Pull down time+20℃ to -40℃Within 55 minWithin 55 minWithin 55 minWithin 50 min
Heat up rate-26℃ to +86℃【-21℃ to +131℃】4.0℃/min【4.0℃/min】4.0℃/min【4.0℃/min】4.0℃/min【4.0℃/min】3.0℃/min【3.0℃/min】
Pull down rate+86℃ to -26℃【+131℃ to -21℃】2.5℃/min【2.5℃/min】2.5℃/min【2.5℃/min】2.5℃/min【2.5℃/min】3.0℃/min【3.0℃/min】
Temp. & humidity fluctuations±0.3℃ / ±2.5%RH【±0.5℃ (100.1℃~150℃)】
Temp. & humidity gradientTemp.: 3.0℃【5.0℃】; Temp./humidity: 2.0℃ / 5.0%RH
Temp. & humidity variation in spaceTemp.: 2.5℃【5.0℃】; Temp./humidity: 1.5℃ / 5.0%RH
Ambient temp. rangeMinimum temp. may not be maintained above approx. +35℃.+5℃ ~ +40℃
Main Unit
Inside dimensions (W × H × D mm)500 × 350 × 350(500 × 350 × 350) × 2(500 × 350 × 350) × 3(600 × 600 × 500) × 2
Capacity (L)6161 × 261 × 3180 × 2
Outside dimensions (W × H × D mm)660 × 1285 × 1040660 × 1885 × 1040660 × 1955 × 1375760 × 1855 × 1645
Weight (kg)190330500475
Construction
Exterior / interior / fanSteel plate baked paint; SUS304; Sirocco fan
System / refrigerantDC inverter-controlled air-cooled rotary refrigeration unit; R-448A
Heater / humidifier / coolerNichrome strip heater; Sheathed heater (SUS316L); Plate fin coil
Controller
Control sensor / method / displayPt100; PID control; LED indication; 0.1℃ / 1%RH
Interface
Memory / Ethernet / USB8GB; RJ45 10BASE-T/100BASE-TX ×1; USB2.0 Type A ×1
Required Equipment
Power supplyAC200V 3φ 50/60Hz; voltage fluctuation ±10%
Humidifying waterIon-exchanged or distilled water (0.1 ~ 10 μS/cm)
Maximum load current (A)15304546
Operating current (A)11223334
Exhaust heat (kW)0.62 ~ 3.61.24 ~ 7.21.86 ~ 10.81.0 ~ 9.6
Safety / Features
Protective deviceLeakage breaker; fan motor overload; dry-burn; refrigeration pressure/overload/overheat; phase detector; fuses; sensor disconnect; temp/humidity alarms; inverter/outage/filter/wick/tank alarms
Additional featuresMemory backup; temporary stop; monitor; self-diagnosis; power failure protection; external alarm; test end/time signal; wait; interlock; auto start/timer; auto light shutoff; manual refrigeration; fault history; continuous recording; room temp standby
Standard Equipment
Main unitEthernet RJ45; square cable port 100 × 30mm left/right; interior lighting; casters/adjusters; condenser dust filter
AccessoriesPerformance stated at ambient +23°C, rated voltage, no specimen unless noted.Instruction manual; φ50mm silicone plug; water tank (401/402: 10L ×1, 403/412: 20L ×2); wick gauze (12 pcs/layer)

【 】 = values with the optional high-temperature (+150°C) specification · Performance measured at +23°C ambient, rated voltage, no specimen (per catalogue) · Specifications are subject to change by the manufacturer without notice

Request a quote for this model
ETAC · Thermal Shock

Thermal shock chambers

WINTECH NEO
Product photo (pending)
Thermal Shock Chamber

WINTECH NEO

High-performance thermal shock / temperature cycle tester, available as air-tank and liquid-tank types.

  • 7.5-inch color touch panel with progress graphs and automatic temperature logging
  • Supports 2-zone and 3-zone tests
  • 300°C models shorten low-temperature recovery time
  • Liquid series: automatic brine feeder and air-cylinder specimen transfer

Line-up at a glance

ModelLow temp.High temp.Test area / basket (mm)Capacity
NT551A-65 ~ 0°C+60 ~ +200°C370 × 330 × 40048 L
NT1051A-65 ~ 0°C+60 ~ +200°C370 × 500 × 40074 L
NT1251A-65 ~ 0°C+60 ~ +200°C650 × 500 × 400130 L
NT1051W-80 ~ 0°C+60 ~ +200°C370 × 500 × 40074 L
NT1251W-80 ~ 0°C+60 ~ +200°C650 × 500 × 400130 L
NT2051W-80 ~ 0°C+60 ~ +200°C700 × 500 × 600210 L
NT3702A / NT3702W-65 ~ -10°C+80 ~ +300°C370 × 450 × 40066 L
LT20W (Liquid)-65 ~ 0°C+50 ~ +200°C120 × 120 × 1502 kg
LT60W (Liquid)-65 ~ 0°C+50 ~ +200°C170 × 170 × 2503 kg
LT80W (Liquid)-65 ~ 0°C+50 ~ +200°C220 × 220 × 3106 kg

A = air-cooled · W = water-cooled · R-448A refrigerant

Ask about this model Spec SheetManufacturer page ↗
Spec Sheet full specification table8 models
SpecificationNT551ANT1051ANT1251ANT1051WNT1251WNT2051WNT3702ANT3702W
System
System2 or 3 zone damper switching
Performance
Low temp. exposure range-65℃ ~ 0℃-65℃ ~ 0℃-65℃ ~ 0℃-65℃ ~ 0℃-65℃ ~ 0℃-65℃ ~ 0℃-65℃ ~ -10℃-65℃ ~ -10℃
High temp. exposure range+60℃ ~ +200℃+60℃ ~ +200℃+60℃ ~ +200℃+60℃ ~ +200℃+60℃ ~ +200℃+60℃ ~ +200℃+80℃ ~ +300℃+80℃ ~ +300℃
Temp. recovery timeWithin 5 minWithin 4 minWithin 4 minWithin 4 minWithin 4 minWithin 4 minWithin 10 min (SR ON)Within 7 min (SR ON)
Low temp. exposure temp./time-40℃/30min-55℃/30min-55℃/30min-65℃/30min-65℃/30min-65℃/30min-40℃/30min-40℃/30min
Ambient temp. exposure time-5 min5 min5 min5 min5 min0 min0 min
High temp. exposure temp./time125℃/30min150℃/30min150℃/30min150℃/30min150℃/30min150℃/30min250℃/30min300℃/30min
SpecimenPlastic mold IC 2.5kg + basket/support 1kgPlastic mold IC 2.5kg + basket/support 2kgPlastic mold IC 2.5kg + basket/support 2.8kgPlastic mold IC 2.5kg + basket/support 1kgPlastic mold IC 5kg + basket/support 2kgPlastic mold IC 5kg + basket/support 2.8kgAluminium fragment 1.25kgAluminium fragment 2.5kg
Sensor position / guarantee ambientUpwind; 23℃±5℃
Allowable ambient conditions+10℃ ~ +35℃+10℃ ~ +32℃+10℃ ~ +32℃+5℃ ~ +35℃+5℃ ~ +35℃+5℃ ~ +35℃+10℃ ~ +35℃+5℃ ~ +35℃
Rooms
Pre-cooling / pre-heating ranges-75℃ ~ 0℃; +60℃ ~ +225℃-75℃ ~ 0℃; +60℃ ~ +225℃-75℃ ~ 0℃; +60℃ ~ +225℃-80℃ ~ 0℃; +60℃ ~ +225℃-80℃ ~ 0℃; +60℃ ~ +225℃-80℃ ~ 0℃; +60℃ ~ +225℃-75℃ ~ -20℃; +90℃ ~ +350℃-75℃ ~ -20℃; +90℃ ~ +350℃
Main Unit
StructureTest room, pre-heating room, pre-cooling room.3 chambers
Test room inside dimensions (W × H × D mm)370 × 330 × 400370 × 500 × 400650 × 500 × 400370 × 500 × 400650 × 500 × 400700 × 500 × 600370 × 450 × 400370 × 450 × 400
Outside dimensions (W × H × D mm)Not including protrusions.1150 × 1800 × 13251150 × 1940 × 17701430 × 1940 × 17201150 × 1940 × 16201430 × 1940 × 14701480 × 1940 × 16701150 × 1980 × 17201150 × 1980 × 1570
Weight (kg)Approx. 730Approx. 1050Approx. 1230Approx. 1020Approx. 1180Approx. 1280Approx. 1150Approx. 1000
Test room load capacity30kg uniformly distributed100kg uniformly distributed100kg uniformly distributed30kg uniformly distributed100kg uniformly distributed100kg uniformly distributed30kg uniformly distributed30kg uniformly distributed
Specimen baskets / load capacity6 pcs; 5.0kg/pc7 pcs; 5.0kg/pc7 pcs; 5.0kg/pc7 pcs; 5.0kg/pc7 pcs; 7.5kg/pc7 pcs; 7.5kg/pc6 pcs; 5.0kg/pc6 pcs; 5.0kg/pc
Door / cable portSingle door; φ50mm round left portSingle door; φ50mm round left portSingle door; φ50mm round left portSingle door; φ50mm round left portSingle door; φ50mm round left portSingle door; φ50mm round left portSingle door; 30×100mm square left portSingle door; 30×100mm square left port
Controller
ControllerPID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type APID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type APID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type APID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type APID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type APID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type APID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type A (with SR function)PID upwind; ECO operation; LCD touch panel; 7.5 inch color LCD; 1℃; 30 programs; 9999 cycles; 16GB; USB2.0 Type A (with SR function)
Exposure time settingHigh/low max 120 min; ambient max 99 min
Additional featuresAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling dryingAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling dryingAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling dryingAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling dryingAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling dryingAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling dryingAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling drying; plus SR functionAuto start; automatic defrost; WAIT; self-monitoring; test end display; elapsed cycle; troubleshooting; auto pre-cooling/heating setup; alarm history; end state selection; cycle counter; outputs; alarms; graphic display; USB; pause; pre-cooling drying; plus SR function
Equipment
Temp. sensor / air / damperPt100; Sirocco fan; air cylinder
Refrigeration
System / compressor / refrigerantDual refrigeration; air-cooled hermetic reciprocating; R-448A + R23Dual refrigeration; air-cooled hermetic scroll; R-448A + R23Dual refrigeration; air-cooled hermetic scroll; R-448A + R23Dual refrigeration; water-cooled hermetic scroll; R-448A + R23Dual refrigeration; water-cooled hermetic scroll; R-448A + R23Dual refrigeration; water-cooled hermetic scroll; R-448A + R23Dual refrigeration; scroll compressor; R-404A + R23Dual refrigeration; scroll compressor; R-404A + R23
Equipment
HeaterStrip wire heater
Utility
Power supplyAC200V 3φ 50/60Hz ±10%
Maximum power consumption (kVA)1930323544483540
Maximum load current (A)558793100125138101113
Operating current (A)2649505663657180
Refrigeration exhaust heat (kW)71111---11-
Cooling water supply rate---38 L/min (25℃) / 55 L/min (32℃); 1¼B47 L/min (25℃) / 82 L/min (32℃); 1¼B47 L/min (25℃) / 82 L/min (32℃); 1¼B-55 L/min (32℃)
Cooling water supply pressure---0.2 ~ 0.5MPa0.2 ~ 0.5MPa0.2 ~ 0.5MPa-0.2 ~ 0.5MPa
Dry air / drainage0.4~0.7MPa dry air; atmospheric drainage φ8×φ11 hose
Safety / Accessories
Protection deviceEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlockEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlockEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlockEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlock; plus cooling water abnormality/interruption detectionEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlock; plus cooling water abnormality/interruption detectionEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlock; plus cooling water abnormality/interruption detectionEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlockEarth leakage breaker; blower thermal; reverse phase relay; overheat protectors; temp alarms; refrigeration overload/high-low pressure; damper proximity; door detection; sensor disconnect; ambient abnormality; external alarm; interlock
AccessoriesPerformance at ambient 23℃±5℃ with ECO OFF unless noted.Cable port silicone plug (2 pcs); instruction manualCable port silicone plug (2 pcs); instruction manualCable port silicone plug (2 pcs); instruction manualCable port silicone plug (2 pcs); instruction manual; Y strainerCable port silicone plug (2 pcs); instruction manualCable port silicone plug (2 pcs); instruction manualCable port silicone plug (2 pcs); instruction manualCable port silicone plug (2 pcs); instruction manual

【 】 = values with the optional high-temperature (+150°C) specification · Performance measured at +23°C ambient, rated voltage, no specimen (per catalogue) · Specifications are subject to change by the manufacturer without notice

Request a quote for this model
ETAC · Industrial Oven

Industrial ovens

HISPEC
Product photo (pending)
Industrial Oven

HISPEC

High-temperature ovens for everything from research to industrial heat treatment and drying.

  • PID control eliminates overshoot during temperature rise
  • Triple over-temperature protection: soft limiter, hard limiter and thermal fuse
  • Five standard operation patterns incl. constant, auto start and 2-step
  • Power-failure recovery and heater output monitoring

Key specifications (from the manufacturer's website)

ModelTemp. rangeInternal W×H×D (mm)Capacity
HT210 / HT310RT+20 ~ 200°C / 300°C450 × 450 × 45091 L
HT220 / HT320RT+20 ~ 200°C / 300°C600 × 600 × 600216 L
HT240 / HT340RT+20 ~ 200°C / 300°C800 × 1000 × 800640 L
HT250 / HT350RT+20 ~ 200°C / 300°C1000 × 1000 × 800800 L
HS240 (Vertical)RT+20 ~ 200°C600 × 900 × 600324 L
HS250 (Vertical)RT+20 ~ 200°C600 × 1200 × 600432 L
HS260 (Vertical)RT+20 ~ 200°C800 × 1200 × 600576 L

RT = room temperature · HT2xx = 200°C series · HT3xx = 300°C series

Ask about this modelManufacturer page ↗

HISPEC special-purpose types

HISPEC HG Type
Product photo (pending)
Solvent drying

HISPEC HG Type

Safety specification for solvent drying, with a gas concentration alarm as standard and forced exhaust airflow.

HG220 · 216 L · ~200°C
Application: Ceramic molding, drying after cleaning electronic components

Ask about this model →
HISPEC K Type
Product photo (pending)
Forced exhaust

HISPEC K Type

Hot-air forced exhaust oven.

HT340K / HT350K · 640 / 800 L · ~250°C
Application: Secondary vulcanization, e.g. silicone rubber

Ask about this model →
HISPEC N Type
Product photo (pending)
Nitrogen / non-oxidation

HISPEC N Type

Non-oxidation oven with guaranteed residual oxygen of 100 ppm or less.

HT320N · 216 L · RT+40 ~ 250°C
Application: Heat treatment of parts with copper or silver electrodes

Ask about this model →
HISPEC H Type
Product photo (pending)
Ultra-high temperature

HISPEC H Type

Ultra-high-temperature oven, up to 500°C.

EHT-2H · RT+40 ~ 500°C
Application: Heat-resistance and high-temperature life tests of ceramics, metals and engineering plastics

Ask about this model →
HISPEC S Type
Product photo (pending)
With explosion vent

HISPEC S Type

Pressure-relief explosion vent in the ceiling, for drying processes that generate flammable vapor.

HT210S–HT250S (200°C) · HT310S–HT350S (300°C)
Application: Drying where flammable gas or vapor is generated

Ask about this model →
ETAC · Walk-in

Walk-in chambers

COLONIA E Series
Product photo (pending)
Walk-in Chamber

COLONIA E Series

A walk-in constant temperature & humidity room for large samples or many samples at once.

  • Non-frost mechanism allows continuous operation at low temperature / low humidity without defrosting
  • Flattened air-conditioning unit expands the effective test space
  • Easy-to-read RUN / TROUBLE / IN-OUT status panel at the door
  • 7.5-inch touch panel, multi-step programs, USB data export
  • Options: -40°C specification, W1400 double door, antechamber, floor reinforcement

Line-up at a glance

ModelTemp. rangeHumidityInternal W×H×D (mm)Capacity
CH111PA-E / CH111P-E-10 ~ +80°C20–95%RH1670 × 2200 × 16706.1 m³
CH121PA-E / CH121P-E-10 ~ +80°C20–95%RH3470 × 2200 × 167012.7 m³
CH131P-E-10 ~ +80°C20–95%RH3470 × 2200 × 257019.6 m³
CH311PA-E / CH311P-E-30 ~ +80°C15–95%RH1670 × 2200 × 16706.1 m³
CH321PA-E / CH321P-E-30 ~ +80°C15–95%RH3470 × 2200 × 167012.7 m³
CH331P-E-30 ~ +80°C15–95%RH3470 × 2200 × 257019.6 m³

PA = air-cooled · P = water-cooled · Floor load 600 kg/m² · Standard door W850 × H1820 mm

Ask about this model Spec SheetManufacturer page ↗
Spec Sheet full specification table10 models
SpecificationCH111P-ECH121P-ECH131P-ECH311P-ECH321P-ECH331P-E
Performance
Temperature range-10℃ ~ +80℃-10℃ ~ +80℃-10℃ ~ +80℃-30℃ ~ +80℃-30℃ ~ +80℃-30℃ ~ +80℃
Humidity range20% ~ 95%RH20% ~ 95%RH20% ~ 95%RH15% ~ 95%RH15% ~ 95%RH15% ~ 95%RH
Temp. ramp-down rate0.4℃/min
Temp. ramp-up rate1℃/min
Temp. humid. variation±0.5℃ / ±4%RH
Temp. gradient2.5℃ / 8%RH
Temp. variation in space2.5℃ / 8%RH
Sensor / operating ambientCooling water temperature 30℃ or less.Pt100Ω; +5℃ ~ +35℃
Main Body
Internal dimensions (W × H × D mm)1670×2200×16703470×2200×16703470×2200×25701670×2200×16703470×2200×16703470×2200×2570
Capacity (m³)6.112.719.66.112.719.6
Floor area (m²)2.795.798.922.795.798.92
External dimensions (W × H × D mm)2455×2405×18004255×2405×18004255×2405×27002455×2405×18004255×2405×18004255×2405×2700
Door / floor loadSingle hinged door W850×H1820; 600kg/m² surface load
Exterior / interior / insulationColored steel plate white gray; SUS304 2B; rigid urethane foam 65mm
Main Equipment
Circulation fan / refrigeratorSirocco fan; water cooling type ×1 setSirocco fan; water cooling type ×2 setsSirocco fan; water cooling type ×3 setsSirocco fan; water cooling type ×1 setSirocco fan; water cooling type ×2 setsSirocco fan; water cooling type ×3 sets
Refrigerant / expansionR-448A; pulse controlled electronic expansion valve
Heaters / cooling coilNichrome strip heater; sheathed humidification heater; plate fin coil
Display / communication7.5 inch color LCD display; RS485 I/F optional
Required Equipment
Power supply / earth leakage breakerAC200V 3φ 50/60Hz ±10%; 60AAC200V 3φ 50/60Hz ±10%; 60AAC200V 3φ 50/60Hz ±10%; 75AAC200V 3φ 50/60Hz ±10%; 60AAC200V 3φ 50/60Hz ±10%; 60AAC200V 3φ 50/60Hz ±10%; 75A
Max. load current (A)526171526171
Rated power (kVA)172123.5172123.5
Cooling water volume (cooling tons)1 cooling ton = 13 L/min.256.9256.9
Max. humidification water volume (L/hr)2
Humidification water / drainagePure water 0.1~10 μS/cm, 0.1~0.3MPa, 1/2 pipe; natural drainage 20A ×2
Safety / Features
Protective / safety deviceEarth leakage breaker; overheat prevention; no-water heating prevention; high/low pressure switch; fan thermal; overload relays/breakers; lighting earth leakage; indoor emergency stop; emergency escape
Attached functionsAuto start; wait; self-monitoring; test end time; troubleshooting; alarm history; upper/lower temp/humidity alarms; pause; graphic display; USB history; humidification delay; refrigerator selection; time signal; power failure protection; interlock/external alarm; calendar timer; water monitoring; indicators
Standard Equipment
Standard equipmentPerformance at ambient +23℃, no specimen/load, cooling water ≤25℃, JTMK09 compliant.Observation window W350×H350mm; interior light; one round cable port/hole φ54; ventilation fan; refrigerator pressure gauge; wick; water control valve; instruction manual; inspection/certificate with performance data; warranty sheet.

【 】 = values with the optional high-temperature (+150°C) specification · Performance measured at +23°C ambient, rated voltage, no specimen (per catalogue) · Specifications are subject to change by the manufacturer without notice

Request a quote for this model
ETAC · Reliability Evaluation Systems

Reliability evaluation systems

Used together with environmental chambers to measure degradation of electronic parts during testing.

SIR13
Product photo (pending)
Insulation Degradation Evaluation System

SIR13

Simultaneously measures electrochemical migration (ion migration), insulation resistance and insulation degradation for evaluating electronic materials and components.

  • Proprietary SMU measurement boards — force-common or per-pin
  • High-speed capture: 128 points before and 151 points after a migration event
  • Measurement modes: time, point trigger, group trigger
  • Three enclosures: standard, mini and SLIM

Key specifications (from the manufacturer's website)

ItemValue
Measurement channels8 – 128 ch
Max. applied voltage10 kV (HV unit)
Max. measurable resistance10,000 PΩ
Measuring cycle20 msec / ch
Current range3.2 mA – 320 pA
SMU boards250 V (16 ch / 8 ch) · 500 V · 1 kV
Ask about this modelManufacturer page ↗
MLR23
Product photo (pending)
Conduction Reliability Evaluation System

MLR23

Evaluates conduction (junction) reliability of lead-free solder joints, BGA solder cracks and connectors under thermal shock and high humidity.

  • Up to 288 channels, with a full 288-channel cycle in under 3 seconds
  • Two modes: high-speed 10 ms and high-precision 200 ms
  • AC and DC resistance measurement
  • Resume suspended tests without data loss; accepts chamber temperature/humidity data

Key specifications (from the manufacturer's website)

ItemValue
Channels32 – 288 ch
AC resistance ranges2 mΩ – 2 kΩ
DC resistance ranges200 mΩ – 200 kΩ
Measuring cycle10 ms / 200 ms
Ask about this modelManufacturer page ↗
ETAC

Other models

Battery test chamber

HIFLEX SBC

Charge/discharge test chamber, 180 L × 2, with automatic CO₂ fire extinguisher and reinforced doors as standard.

Ask about this model →
Condensation cycle

DEW CYCLE

Reproduces condensation from temperature/humidity changes (130 / 210 L); thermal shock up to +150°C.

Ask about this model →
Pharma stability

LABONIC

Pharmaceutical stability chambers, non-frost, with up to 64 units managed from a single PC.

Ask about this model →
Capacitor life test

TLE60

Capacitor burn-in and lifetime evaluation system.

Ask about this model →
Capacitor characterization

MCL42

Automatic capacitor characterization across temperature and frequency.

Ask about this model →
Disconnection detector

ED71

Transient disconnection detector for connectors and solder joints.

Ask about this model →

Specifications are subject to change by the manufacturer — please contact our sales team to confirm · Manufacturer: etac.jp

Have a test requirement? Let us help you choose.

Tell us your test standard, sample size and temperature range — our sales team will get back to you.

Request a Quote
Inquiry
sales@dkkthai.com

Send an inquiry

Goes straight to sales@dkkthai.com